An effective emergency action plan should
take into account a range of emergencies. Only through education, training, and
practice drills can a facility be prepared to handle any emergency. Here is a
recent story that emphasizes the continued need for effective emergency plans.
Firefighters extinguished a fire at
Nemack on the Sheboygan, Wisconsin during one morning during the week of March
2, 2014.
Around 6:30 AM, the Sheboygan Fire
Department responded to a report of a fire inside the building located.
Firefighters arriving on scene found
heavy black smoke coming from roof vents and additional firefighters were
requested. Nemack employees were using on site fire hoses to contain the fire
according to Sheboygan Fire Department Shift Commander. Firefighters then evacuated the building, and the fire was quickly extinguished.
Firefighters found a considerable
amount of smoke and fire near the point of entry. The fire was contained and
extinguished. The fire was limited to a maintenance area. There were no
injuries sustained by employees or firefighters. No damage estimate was
available as of the following morning.
Congratulations to Nemack for
contacting the fire department immediately. In contrast the Aluminium Plant
Safety Blog has posted incidents where plant personnel tried to put out a fire
prior to calling for help. That mistake commonly results in injuries and
greater facility damage which can be minimized if not prevented when the local
fire department is contacted immediately.
After contacting the fire
department, Nemack personnel manned fire hoses to contain the fire until the Sheboygan
Fire Department arrived. Afterwards the Nemack personnel were evacuated and the
Sheboygan Fire Department quickly put the fire out.
Can anyone in your plant grab
a fire extinguisher or a fire hose and try to extinguish a fire? The answer is
no. Only personnel who are trained and identified in the emergency action plan
should use a fire extinguisher or a fire hose. Also, it is recommended that
trained personnel be retrained, and/or tested (to confirm competentness) at
minimum once a year.
The Occupational Safety and
Health Administration has a useful document "Titled How To Plan For
Workplace Emergencies and Evacuations". Which can be found here:
Please Comment.
No comments:
Post a Comment