Moving large, heavy loads is common in aluminium plants. Much technology has been developed for these operations. Including specially designed fork lift trucks, and overhead crane hoist attachments. There are significant safety issues to be considered, both for the operators of the diverse "lifting" devices, and for the workers in proximity to them. Here is a recent story:
A man was killed while loading aluminium at an Australian dock.
The incident occurred last month whilst the 50 year old worker was working on board a Chinese bulk carrier. The worker had 25 years experience on the job.
According to police a 20 tonne pallet of aluminium ingots was being loaded into the ship when it shifted unexpectedly, crushing the worker.
The man died at the scene.
The proper use and maintenance of safety slings is a must. Each facility should abide by the local and federal regulations regarding the maintenance of slings.
One plant identified sling maintenance as a hazard. Workers would utilize slings when needed, maintenance and replacement was not performed systematically, but by need. The facility now has a system in which all slings are checked and marked as "approved for use". After each use, workers place the slings in container for inspection prior to reuse. This has assured that each sling is inspected and replaced on criteria set forth by the facility in conjuncture with the safety sling manufacturer.
No comments:
Post a Comment